Introduction

Fringe stopping is a technique for implementing geometric corrections for an observation in the correlator, prior to cross-correlation, integration and averaging. It is an alternative to performing geometric corrections later in the data processing pipeline, with tools such as Birli or cotter, as has been necessary for MWA observations in the past. In most cases fringe stopping is expected to be superior to post-correlation geometric corrections, and it will be the default method for MWA observations starting in the second half of 2023. It is currently available for evaluation by request, and feedback is especially welcome at this stage in the commissioning process. 

Background

The fringe stopping process involves applying signal delays to incoming data to compensate for changing path delays between tiles during an observation. The major advantage of this approach to geometric corrections is that it is performed prior to cross-correlation, integration and averaging. Prior to fringe stopping, many of the observation modes available to MWA users involving long integration times or broad frequency averaging would have resulted in unacceptable geometric errors, as downstream processing tools require relatively fine-grained data to perform corrections effectively. Short integration times and fine frequency resolution both have a large impact on the size of the visibility data produced in a given observation, without necessarily improving the scientific usefulness of the data - typically, most of this resolution is averaged away in the final data products. Fringe stopping allows users to make use of long integration times and broad frequency averaging, without sacrificing the quality of the data. Smaller data volumes are easier to manage, store and process, and longer observations that may have produced prohibitively large volumes of data in the past may be feasible with fringe stopping. 

Diagram: Comparison of geometric corrections process for using Birli and fringe-stopping

We encourage all MWA users to test this new capability for any observations in the first observing semester of 2023. Starting in the second observing semester of 2023, fringe stopping will be the default mode for all MWA observations. Observations without fringe stopping will continue to be supported on an opt-out basis.

Implementation

A technical summary of the MWAX fringe stopping implementation will be published soon as part of the forthcoming MWAX paper, a detailed description of the design and validation will be published shortly thereafter.

Usage

Fringe stopping may be requested for any observation in the first observing semester of 2023. Users may request it at the time of scheduling, or at any time prior to the start of the observation.

Validation

Fringe stopping has been validated against the output of Birli and shown to produce identical results in tests involving hand-crafted data, designed to test particular aspects of its behaviour in isolation. Results on real-world data, from running fringe stopping on live observations simultaneously with Birli in a split-mode configuration, have shown fringe-stopping to perform comparably to Birli on short integration times and fine frequency averaging, and with superior results on longer integration times and coarser channel averaging,

The validation process will be described in detail in a future publication.