Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

VCSBeam version

Required: >= v2.18.1.

# On Garrawarla, test vcsbeam version
$ module use /pawsey/mwa/software/python3/modulefiles
$ module load vcsbeam
MWA Beamformer v2.18.1_e79c6bd

Calibration

Offline FinePFB

$ cd /astro/mwavcs/vcs/1318345216/combined
$ for freq in {109..120}
do
    sed "s/FREQ/${freq}/" < make_legacy.sbatch > make_legacy_ch${freq}.sbatch
    sbatch make_legacy_ch${freq}.sbatch
done
make_legacy.sbatch 
#!/bin/bash -l

#SBATCH --nodes=1
#SBATCH --cpus-per-task=1
#SBATCH --ntasks-per-node=1
#SBATCH --mem=370gb
#SBATCH --partition=gpuq
#SBATCH --gres=gpu:1
#SBATCH --time=01:00:00
#SBATCH --account=mwavcs
#SBATCH --export=NONE

module use /pawsey/mwa/software/python3/modulefiles
module load vcsbeam
module load openmpi-ucx-gpu

DATAPATH=/astro/mwavcs/asvo/251861

srun -N 1 -n 1 fine_pfb_offline -m $DATAPATH/1318345216.metafits -b 1318345216 -T 600 -f FREQ -d $DATAPATH

Offline Correlator

$ cd /astro/mwavcs/vcs/1318345216/cal/1318345216/vis
$ for freq in {109..120}
do
    sed "s/FREQ/${freq}/" < offline_correlate.sbatch > offline_correlate_${freq}.sbatch
    sbatch offline_correlate_${freq}.sbatch
done
offline_correlate.sbatch 
#!/bin/bash -l

#SBATCH --nodes=1
#SBATCH --mem=370gb
#SBATCH --partition=gpuq
#SBATCH --gres=gpu:1
#SBATCH --time=01:00:00
#SBATCH --account=mwavcs
#SBATCH --export=NONE

module use /pawsey/mwa/software/python3/modulefiles
module load offline_correlator

for t in {0..299}
do

    gpssecond=$(echo "$t + 1318345220" | bc)
    gpubox=$(echo "FREQ - 108" | bc)

    INPUT_DATA_FILE=/astro/mwavcs/vcs/1318345216/combined/1318345216_${gpssecond}_chFREQ.dat
    START_SECOND=${gpssecond}
    DUMPS_PER_SECOND=1 # This sets the output time resolution
                    # (e.g. 20 --> 1/20 = 0.05s = 50 ms)
                    # Minimum allowed resolution is 2 ms
    CHANS_TO_AVERAGE=4 # This sets the output frequency resolution
                   # (e.g. 4 --> 4x10 kHz = 40 kHz)
    GPUBOX_CHANNEL_NUMBER=${gpubox} # This should be chosen to "match" the input channel
                         # This is not easy! (mwalib handles this, but at the
                         # moment, offline_correlator is not using mwalib)
    OUTPUT_PREFIX=1318345216 # Output files begin with this

    srun -N 1 -n 1 offline_correlator \
        -d ${INPUT_DATA_FILE} \
        -s ${START_SECOND} \
        -r ${DUMPS_PER_SECOND} \
        -n ${CHANS_TO_AVERAGE} \
        -c ${GPUBOX_CHANNEL_NUMBER} \
        -o ${OUTPUT_PREFIX}

done

RTS

Create source list

Create source list
$ cd /astro/mwavcs/vcs/1318345216/cal/1318345216
$ module load srclists/v1.0.0
$ srclist_by_beam.py -m /astro/mwavcs/vcs/1318345216/1318345216_metafits_ppds.fits -n 1000 -s ${SRCLISTS_DIR}/srclist_pumav3_EoR0aegean_EoR1pietro+ForA.txt

Set up flagged tiles

To find which tiles need to be flagged, find the broken tiles by going to the observation status page (http://ws.mwatelescope.org/observation/obs/?obs_id=1318345216). In the section "Tile errors and flags", you will find the "TileNames" for any tiles that should be flagged. Then, in the metafits file for the observation, you will find the "Input" numbers associated with the X and Y polarisations of each tile. The numbers you need to put in the "flagged_tiles.txt" are the Input numbers divided by two (and possibly rounded down). For example, in 1318345216, Tile064 is listed as broken, and in the metafits file, that tile's polarisations are associated with inputs 144 & 145. This means that the number that goes into flagged_tiles.txt for this tile is 72. In this way, the following list is constructed for this observation.

/astro/mwavcs/vcs/1318345216/cal/1318345216/rts/flagged_tiles.txt
1
12
45
51
60
72
93
94
112

Set up flagged channels

Setting up the flagged channels is more straightforward. As a rule, we always flag the edge channels (80 kHz worth on either side) and the centre channel. Since we have averaged up to 40 kHz when we did the offline correlation step above, that means we will be flagging the outer two channels on either side (as 2 x 40 kHz = 80 kHz) and the single centre channel. Since there are 32 channels in this case, the final list of flagged channels is:

/astro/mwavcs/vcs/1318345216/cal/1318345216/rts/flagged_channels.txt
0
1
16
30
31

Extra flags

After running the RTS (see below) and checking the solutions (using the python scripts supplied in VCSTools), I found that I also had to add 14 to the list of flagged channels, and 53 and 59 to the list of flagged tiles.

Run the RTS

Run the RTS
$ cd /astro/mwavcs/vcs/1318345216/cal/1318345216/rts
$ sbatch /astro/mwavcs/vcs/1318345216/batch/RTS_1318345216.batch


/astro/mwavcs/vcs/1318345216/batch/RTS_1318345216.batch 
#!/bin/bash -l

#SBATCH --export=NONE
#SBATCH --output=/astro/mwavcs/vcs/1318345216/batch/RTS_1318345216.out
#SBATCH --account=mwavcs
#SBATCH --clusters=garrawarla
#SBATCH --partition=gpuq
#
#SBATCH --cpus-per-task=1
#SBATCH --mem-per-cpu=10240MB
#SBATCH --nice=0
#SBATCH --chdir=/astro/mwavcs/vcs/1318345216/cal/1318345216/rts
#SBATCH --time=2:00:00
#SBATCH --nodes=13
#SBATCH --cpus-per-gpu=1
#SBATCH --gres=gpu:1

ncpus=1
export OMP_NUM_THREADS=1


module use /pawsey/mwa/software/python3/modulefiles/
module load vcstools/master

module load RTS/master


cd /astro/mwavcs/vcs/1318345216/cal/1318345216/rts
export UCX_MEMTYPE_CACHE=n
srun --export=all -N 13 -n 13 rts_gpu /astro/mwavcs/vcs/1318345216/cal/1318345216/rts/rts_1318345216.in
# ^^^^ 13 = 12 coarse channels (1 node per coarse channel) + 1 master node


/astro/mwavcs/vcs/1318345216/cal/1318345216/rts/rts_1318345216.in 
ReadAllFromSingleFile=
BaseFilename=/astro/mwavcs/vcs/1318345216/cal/1318345216/vis/*_gpubox
ReadGpuboxDirect=0
UseCorrelatorInput=1

ReadMetafitsFile=1
MetafitsFilename=/astro/mwavcs/vcs/1318345216/1318345216

DoCalibration=
doMWArxCorrections=1
doRawDataCorrections=1
doRFIflagging=0
useFastPrimaryBeamModels=0
generateDIjones=1
applyDIcalibration=1
UsePacketInput=0
UseThreadedVI=1

MaxFrequency=170.24
ObservationFrequencyBase=138.895
ObservationTimeBase=2455846.1252314816
ObservationPointCentreHA=-0.35952189154909175
ObservationPointCentreDec=-5.98757073636307
ChannelBandwidth=0.04
NumberOfChannels=32

CorrDumpsPerCadence=128
CorrDumpTime=1.0
NumberOfIntegrationBins=6
NumberOfIterations=1

StartProcessingAt=0

ArrayPositionLat=-26.7033194
ArrayPositionLong=116.6708152
ArrayNumberOfStations=128

ArrayFile=

SourceCatalogueFile=/astro/mwavcs/vcs/1318345216/cal/1318345216/srclist_pumav3_EoR0aegean_EoR1pietro+ForA_1318345216_patch1000.txt
NumberOfCalibrators=1
NumberOfSourcesToPeel=0
calBaselineMin=20.0
calShortBaselineTaper=40.0
FieldOfViewDegrees=1
  • No labels