$ cd /astro/mwavcs/vcs/1320499816/cal/1320499816/vis
$ for freq in {109..132}
do
    sed "s/FREQ/${freq}/" < offline_correlate.sbatch > offline_correlate_${freq}.sbatch
    sbatch offline_correlate_${freq}.sbatch
done

#!/bin/bash -l

#SBATCH --nodes=1
#SBATCH --mem=370gb
#SBATCH --partition=gpuq
#SBATCH --gres=gpu:1
#SBATCH --time=01:00:00
#SBATCH --account=mwavcs
#SBATCH --export=NONE

module use /pawsey/mwa/software/python3/modulefiles
module load offline_correlator

for t in {8..599}
do

    gpssecond=$(echo "$t + 1320499816" | bc)
    gpubox=$(echo "FREQ - 108" | bc)

    INPUT_DATA_FILE=/astro/mwavcs/vcs/1320499816/combined/1320499816_${gpssecond}_chFREQ.dat
    START_SECOND=${gpssecond}
    DUMPS_PER_SECOND=1 # This sets the output time resolution
                    # (e.g. 20 --> 1/20 = 0.05s = 50 ms)
                    # Minimum allowed resolution is 2 ms
    CHANS_TO_AVERAGE=1 # This sets the output frequency resolution
                   # (e.g. 1 --> 1x10 kHz = 10 kHz)
    GPUBOX_CHANNEL_NUMBER=${gpubox} # This should be chosen to "match" the input channel
                         # This is not easy! (mwalib handles this, but at the
                         # moment, offline_correlator is not using mwalib)
    OUTPUT_PREFIX=1320499816 # Output files begin with this

    srun -N 1 -n 1 offline_correlator \
        -d ${INPUT_DATA_FILE} \
        -s ${START_SECOND} \
        -r ${DUMPS_PER_SECOND} \
        -n ${CHANS_TO_AVERAGE} \
        -c ${GPUBOX_CHANNEL_NUMBER} \
        -o ${OUTPUT_PREFIX}

done

$ cd /astro/mwavcs/vcs/1320499816/cal/1320499816/hyperdrive
$ sbatch hyperdrive.sbatch

#!/bin/bash -l

#SBATCH --job-name=hyp-$1
#SBATCH --output=hyperdrive.out
#SBATCH --nodes=1
#SBATCH --ntasks-per-node=40
#SBATCH --time=01:00:00
#SBATCH --clusters=garrawarla
#SBATCH --partition=gpuq
#SBATCH --account=mwavcs
#SBATCH --export=NONE
#SBATCH --gres=tmp:50g
#SBATCH --gres=gpu:1
 
module use /pawsey/mwa/software/python3/modulefiles
module load hyperdrive
 
set -eux
which hyperdrive
 
cd /astro/mwaeor/MWA/data/1090008640
 
if [[ ! -r srclist_1000.yaml ]]; then
   hyperdrive srclist-by-beam -n 1000 -m *.metafits /pawsey/mwa/software/python3/srclists/master/srclist_pumav3_EoR0aegean_fixedEoR1pietro+ForA_phase1+2.txt srclist_1000.yaml
fi
 
hyperdrive di-calibrate -s srclist_1000.yaml -d *.ms *.metafits