The PSRDADA format is used internally within the MWAX correlator and beamformer components. It is not user-facing.
...
Keyword | Valid values or Example | Used By | Description |
|---|---|---|---|
HDR_SIZE | 4096 | PSRDADA | Required by PSRDADA - size of header in bytes (should always be 4096) |
POPULATED | 0 | 1 | mwax_db2correlate2db | Used to ensure the correlator does not read an incomplete file. 0 means the file is not yet complete, 1 means the file is ready for consumption |
OBS_ID | 1244973688 | mwax-db2fits | Obs_id of this observation |
SUBOBS_ID | 1244973688 | mwax-db2fits | GPS second of this part of the observation. Increments in 8 sec intervals |
MODE | MWAX_CORRELATOR MWAX_VCS NO_CAPTURE | mwax_db2correlate2db mwax-db2fits | This matches the "mode" from the existing metadata database/schedule. |
UTC_START | 2018-10-11-05:26:14 | PSRDADA mwax-db2fits | Required by PSRDADA. This is the UTC start date/time of the subobservation(?). Used by mwax-db2fits to append a human readable date/time to the filename produced. |
OBS_OFFSET | 0 (n seconds since start of observation) | PSRDADA mwax-db2fits | Required by PSRDADA. I believe this is the number of seconds offset from the start of the observation. First subobservation will have this set to 0. Second subobservation will be 8, etc. |
NBIT | 8 | mwax_db2correlate2db | Bits per sample (should always be 8) |
NPOL | 2 | mwax_db2correlate2db mwax-db2fits | Polarisations per tile (i.e. rf_chains) (should always be 2) |
NTIMESAMPLES | 64000 | mwax_db2correlate2db | Number of timesamples in each input sub-block of a subobservation (nominally sub-blocks are 50 ms) |
NINPUTS | 256 | n rfinputs | mwax_db2correlate2db | Number of signal paths present in the input subobservation file, to be correlated (must be <= NINPUTS_XGPU) |
NINPUTS_XGPU | 256 | n rfinputs in multiples of 16 | mwax_db2correlate2db | Number of signal paths actually correlated by xGPU (must be a multiple of 16; must match the number of paths that xGPU has been configured for) |
APPLY_PATH_WEIGHTS | 0 | 1 | mwax_db2correlate2db | Should scalar path weights be applied prior to correlation (for gain normalisation and/or sub-arraying) |
APPLY_PATH_DELAYS | 0 | 1 | mwax_db2correlate2db | Should fractional path delays be applied prior to correlation (for phasing up to a correlation pointing centre) |
APPLY_PATH_PHASE_OFFSETS | 0 | 1 | mwax_db2correlate2db | Should path phase offsets be applied prior to correlation (for fringe-stopping, in conjunction with applying path delays) |
APPLY_COARSE_DERIPPLE | 0 | 1 | mwax_db2correlate2db | Should coarse PFB channeliser de-ripple be applied within the F-stage, prior to cross-correlation (key/value pair not currently implemented) |
DR_PARAM | NULL | deripplev1 | mwax_db2correlate2db | If APPLY_COARSE_DERIPPLE==1 then this value tells db2correlate2db which deripple settings to use (key/value pair not currently implemented) |
INT_TIME_MSEC | 200 - 8000 | mwax_db2correlate2db mwax-db2fits | Correlator integration time (milliseconds) |
FSCRUNCH_FACTOR | 40 (1 - 6400) | mwax_db2correlate2db mwax-db2fits | Correlator frequency scrunch factor: number of ultrafine 200 Hz fine channels to average together |
APPLY_VIS_WEIGHTS | 0 | 1 | mwax_db2correlate2db | Should data occupancy weights be applied to normalise the output visibilities |
TRANSFER_SIZE | 5275652096 | PSRDADA mwax_db2correlate2db | Total number of bytes of input data for one subobservation (of nominally 8 seconds) |
PROJ_ID | G0008 | mwax-db2fits | Project ID of observation |
EXPOSURE_SECS | 8 (in incremements of 8 seconds) | mwax-db2fits | Duration of observation in seconds |
COARSE_CHANNEL | 76 (0 - max receiver channel number == 255) | mwax-db2fits | Receiver channel number |
CORR_COARSE_CHANNEL | 9 | (1 - coarse channel max) | mwax-db2fits | Correlator channel number - which correlator channel "index" is this? e.g. first channel would be 1. In a 24 channel system, last channel would be 24. This would map to gpubox01-24 in the legacy Correlator |
SECS_PER_SUBOBS | 8 | mwax_db2correlate2db mwax-db2fits | Number of seconds per subobservation |
UNIXTIME | 1539235574 | mwax-db2fits | Unix time of the start of this observation. This field is used by mwax-db2fits to provide a UNIX timestep for each integration throughout the observation. |
UNIXTIME_MSEC | 0 | mwax-db2fits | Unix time milliseconds offset of the start of this observation. This will always be 0 with the current setup, but is here for completeness. |
FINE_CHAN_WIDTH_HZ | 10000 | mwax-db2fits | Correlator output fine channel width in Hz |
NFINE_CHAN | 128 | mwax_db2correlate2db mwax-db2fits | Correlator output number of fine channels |
BANDWIDTH_HZ | 1280000 | mwax-db2fits | Coarse channel passband width in Hz, i.e. the channel spacing |
SAMPLE_RATE | 1280000 | mwax_db2correlate2db | Actual sample rate of input data in samples/s (whether critically-sampled or oversampled). |
MC_IP | 0.0.0.0 | mwax-db2fits | Multicast IP for this coarse channel (for debug purposes) |
MC_PORT | 0 | mwax-db2fits | Multicast port for this coarse channel (for debug purposes) |
MWAX_U2S_VER | X.Y.Z | mwax_db2fits | Version number of mwax_u2s used to capture the UDP packets for this subfile |
MWAX_SUB_VER | 1 | mwax_u2s | Version number of subfile format. A value of 2 indicates the presence of the following fields: |
IDX_PACKET_MAP | (OFFSET)+(SIZE)¹ | mwax_u2s | Location and size of packet map in block 0 metadata |
IDX_METAFITS | 0+0 | deprecated/never implemented. Ignore if present. Location and size of copy of metafits file at time of the observation. This was dropped before we ever implemented the embedding, older subfiles may contain spurious entries. | |
IDX_DELAY_TABLE | (OFFSET)+(SIZE)¹ | mwax_u2s | Location and size of delay table in block 0 metadata |
IDX_MARGIN_DATA | (OFFSET)+(SIZE)¹ | mwax_u2s | Location and size of margin data section in block 0 metadata |
IDX_OCCUPANCY_TABLE | (OFFSET)+(SIZE)¹ | mwax_u2s | Location and size of data occupancy table in block 0 metadata (this key/value pair is currently not implemented) |
...